SC01  LED Standard DMX Sub-Controller

• SC01 Standard USITT DMX512/1990 General Grotocol and Extended Protocol；
• SC01 Support Unlimited Cascade Transmission, Unlimited Number;
• SC01 Support Return to Zero Code、Manchester Encoding Protocol；
• Controller Signal OutPut ADRI/PO Terminal Can Achieve DMX512 Channel Automatic Addressing，Support DMX512AP-N / NB, UCS512, MY7221, WS2821 and Other Driver Chips；
• SC01 Support Address Line Differential Signal, Can Be Used for Long Distance;
• Independent Brightness Control of 3 Primary Colors, Easy to Adjust White Balance;
• Support R,RB,RGB,RGBW,RGBWY, and Multi-Color Mixing Control;
• Support 32-65536 Grayscale 16Bit, Support 262144 Grayscale, Restore image Details;
• Accurate Gamma Correction Algorithm, in Line With Human Visual Sense;
• Support Opening and Closing the Function of Writing DMX Addresses and Parameters;
• Support 120Hz Frame Rate to Ensure High-definition Display and 3D Requirements;
• Using Ethernet Interface and UDP Protocol, The Distance is 100 Meters;
• LCD Display Module Displays Controller Parameters and Status in Time;
• Support The Device ID Number Data Flow Sequence and Fixed Arrangement；
• Two RJ45 Ports, Support Mixed Cascading; Automatic Software Display Status;
• Support IP Grouping Function, use Switch Parallel Scheme；
• 8-Port OutPut, Single Channel 512 Channels, ExpansionNeeds to BeTested by Itself;
• Support Backup, Single Device Failure or Network Cable Disconnection Has no Effect;
• Support Device Port Anti-interference and Leakage Design;
• Support Overcurrent and Overvoltage Protection, Can run for a Long Time;
• Network Adaptive or Mandatory 100M Can be Set to Support More Loading;
• Equipment Network Port, Port OutPut, Surge Protection: 1.5KV;
• Support Severe Working Environment -40℃-80℃, Normal Operation Without Failure.
• Supports Online One-Click Upgrade of Device Firmware.